Linux version 2.4.19 (root@debian) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Wed Sep 11 11:20:31 CEST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Woody_w4l ro root=1605 BOOT_FILE=/boot/woody-w4l-2.4.19 
Initializing CPU#0
Detected 995.777 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 256428k/262080k available (1395k kernel code, 5264k reserved, 387k data, 120k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU:     After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU:             Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
ACPI: APM is already active, exiting
vesafb: framebuffer at 0xc0000000, mapped to 0xd080d000, size 65536k
vesafb: mode is 800x600x8, linelength=800, pages=127
vesafb: protected mode interface info at c000:5352
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS735
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST360021A, ATA DISK drive
hdc: ST380021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3 hda4
 hdc: [PTBL] [9729/255/63] hdc1 hdc4 < hdc5 hdc6 hdc7 hdc8 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 530136k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
SiS router pirq escape (99)
SiS router pirq escape (99)
usb-ohci.c: USB OHCI at membase 0xd4865000, IRQ 11
usb-ohci.c: usb-00:02.3, PCI device 1039:7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 11 for device 00:02.2
usb-ohci.c: USB OHCI at membase 0xd4867000, IRQ 11
usb-ohci.c: usb-00:02.2, PCI device 1039:7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:09.0
scsi0 : AdvanSys SCSI 3.3G: PCI Ultra: IO 0xDC00-0xDC0F, IRQ 0x5
hub.c: USB new device connect on bus2/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x57c/0x2800) is not claimed by any active driver.
  Vendor: TOSHIBA   Model: CD-ROM XM-6201TA  Rev: 1037
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: YAMAHA    Model: CRW4260           Rev: 1.0q
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 6, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
Intel 810 + AC97 Audio, version 0.21, 07:44:33 Sep 11 2002
PCI: Found IRQ 11 for device 00:02.7
i810: SiS 7012 found at IO 0xd400 and 0xd800, IRQ 11
i810_audio: Audio Controller supports 2 channels.
ac97_codec: AC97 Audio codec, id: 0x414c:0x4326 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
win4lin: mki_version 3, num_cpus 1, pae 0
preempt_enable 0x00000000
CAPI-driver Rev 1.1.4.1: loaded
capifs: Rev 1.1.4.1
capi20: started up with major 68
kcapi: capi20 attached
capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
cdrom: open failed.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
fxusb: AVM FRITZ!X USB driver, revision 0.2
fxusb: (fxusb built on Sep 11 2002 at 13:05:42)
fxusb: Loading...
kcapi: driver fxusb attached
usb.c: registered new driver fxusb
fxusb: Driver 'fxusb' attached to stack
fxusb: Stack version 3.09-10
kcapi: Controller 1: fritz-usb attached
kcapi: card 1 "fritz-usb" ready.
fxusb: Loaded.
kcapi: notify up contr 1
capi: controller 1 up
kcapi: appl 1 up
kcapi: appl 1 down
kcapi: appl 1 up
kcapi: appl 1 down
