Re: nVidia a segFault XServeru

[Milan Čermák <mcermak zavinac chello bod cz>]

Omlouvám se. Vše, co jsem slíbil, jsem přiložil (jako TAR.GZ abych se 
vešel do 20KB limitu). Přílohu ale konference zrušila. No nic. Pošlu 
aspoň zajímavé výňatky. Konfiguraci jádra pošlu na požádání.

--- XF86Config-4 ---
...
Section "Device"
        Identifier      "NVIDIA FX5200"
        Driver          "nvidia"
#       Option          "NoLogo"      "true"
EndSection
...

--- XFree86.0.log ---
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86 zavinac XFree86 bod Org and patches 
submitted
to fixes zavinac XFree86 bod Org bod   Before reporting bugs in pre-release 
versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 
fabbione zavinac fabbione bod net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 28 September 2004
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.27 (root zavinac Ebenezum) (gcc version 3.3.4 
(Debian 1:3.3.4-13)) #1 Pá říj 29 18:55:36 CEST 2004 T
        ...
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8001004c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
        ...
(II) PCI: End of PCI scan
        ...
(--) PCI:*(1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem 
@ 0xde000000/24, 0xe0000000/28, BIOS @ 0xdffe0000/17
(II) Addressable bus resource ranges are
        ...
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.6111
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.13.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
        ...
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "xtt"
        ...
(II) Loading font xtt
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.6111
        Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
        ...
(II) NVIDIA X Driver  1.0-6111  Tue Jul 27 07:56:22 PDT 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
        ...
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xE0000000
(--) NVIDIA(0): MMIO registers at 0xDE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5200
(--) NVIDIA(0): VideoBIOS: 04.34.20.27.06
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, TV-0
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0):      using first display
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) NVIDIA(0): Primary V_BIOS segment is: 0xc000
(WW) NVIDIA(0): Acer AL506: Using default hsync range of 28.00-63.00kHz
(WW) NVIDIA(0): Acer AL506: using default vrefresh range of 55.00-78.00Hz
(II) NVIDIA(0): Clock range:  12.00 to 400.00 MHz
        ...
(WW) NVIDIA(0): Not using mode "640x480" (height 960 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0):   horizontal sync start (589) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0):      Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0):      Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
        ...
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(++) NVIDIA(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        ...
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing extension GLX

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Fatal server error:
Caught signal 11.  Server aborting

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit zavinac bugs bod debian bod org bod