notebook Gericom 1460 a ACPI

["Kotrla Vitezslav" <kotrla zavinac ceb bod cz>]

Poukousim se rozjet Linux na notebooku Gericom Hollywood 1460 (je to vlastne
Mitac 8060B, onalepkovany take jako Advent 7041, Medion MD 40676 nebo snad
i MaxSelect M5Wide).

Uvnitr je deska Mitac 8060B (subsystem id 1071:8160), na ni cipset Intel i855PN
(Centrino), procesor je Pentium M 1.4 GHz (Centrino). BIOS je nejaky sverazny,
'Insyde Software UCS' (ano, vcetne 'y').

Nainstaloval jsem Ubuntu ('Warty'), prelozil jadro 2.6.9, pri instalaci a potom
pri prekladu jadra system parkrat vytuhl a az potom jsem si vsiml, ze vlastne
nejede vetrak na procesoru. Pri resetu se potom pri najeti BIOSu rozjel jako
blazen, aby zase pri startu kernelu uplne ztichl. Z dodaneho CD jsem 'obnovil'
Windows XP Home, vsechno slape jako hodinky, vetrak se ridi zatezi systemu,
parada, jenze ja na tom potrebuju provozovat Linux.

Nasledujici o ACPI vypise kernel 2.6.7 v poslednim Knoppixu:

   $ uname -a
   Linux Knoppix 2.6.7 #2 SMP Wed Jul 28 04:25:36 CEST 2004 i686 GNU/Linux
   
   $ dmesg | grep ACPI
   BIOS-e820: 000000001fff0000 - 000000001fffffc0 (ACPI data)
   BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
   ACPI: RSDP (v000 OID_00                                    ) @ 0x000e6010
   ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1fffb256
   ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x1ffffb00
   ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x1ffffb90
   ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x1ffffbc0
   ACPI: SSDT (v001  INTEL  EISTRef 0x00002000 INTL 0x20021002) @ 0x1fffb28a
   ACPI: DSDT (v001 INSYDE   Canyon 0x00001004 INTL 0x02002036) @ 0x00000000
   ACPI: PM-Timer IO Port: 0x1008
   ACPI: Subsystem revision 20040326
   ACPI: IRQ9 SCI: Edge set to Level Trigger.
   ACPI: Interpreter enabled
   ACPI: Using PIC for interrupt routing
   ACPI: PCI Root Bridge [PCI0] (00:00)
   ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
   ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
   ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
   ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 7 9 *10 11)
   ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 7 9 10 11)
   ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 9 10 *11)
   ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 7 *11)
   ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11)
   ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 7 9 10 *11)
   ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
   ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 7 9 10 *11)
   ACPI: Power Resource [PUT2] (on)
   ACPI: Embedded Controller [EC0] (gpe 24)
   ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
   ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
   ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
   ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
   ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
   ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
   ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
   PCI: Using ACPI for IRQ routing
   ACPI: (supports S0 S3 S4 S5)
   ACPI: AC Adapter [AC] (off-line)
   ACPI: Battery Slot [BAT0] (battery present)
   ACPI: Power Button (FF) [PWRF]
   ACPI: Lid Switch [LID]
   ACPI: Sleep Button (CM) [SLPB]
   ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)

ACPI modul 'fan' je sice natazeny, ale lautr nic nenajde. Pokud mate nejake 
zkusenosti
s notebooky, jejich vetraky, ACPI nebo Linuxem, budu vdecny za kazdy postreh.

Vitezslav Kotrla