tv vision bt878

[Tomáš Dvořák <tom bod dvorak zavinac elektrahk bod cz>]

dobry den, prosim o radu jak ji nastavit, aby mi prijimala signal... at 
delam co delam nejde mi to....

lsmod:
medved:/home# lsmod
Module                  Size  Used by
tuner                  52140  0
nvidia               4544724  12
bttv                  166260  0
video_buf              17924  1 bttv
firmware_class          8704  1 bttv
i2c_algo_bit            9608  1 bttv
btcx_risc               4872  1 bttv
ir_common               8964  1 bttv
tveeprom               14480  1 bttv
i2c_core               20224  5 tuner,nvidia,bttv,i2c_algo_bit,tveeprom

dmesg
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 19
bttv0: Bt878 (rev 17) at 0000:01:02.0, irq: 19, latency: 64, mmio: 
0xd7ffe000
bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
i2c_adapter i2c-0: adapter [bt878 #0 [sw]] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x50
i2c_adapter i2c-0: master_xfer[0] W, addr=0x50, len=0
i2c_adapter i2c-0: master_xfer[0] W, addr=0x50, len=1
tveeprom 0-0050: Huh, no eeprom present (err=-121)?
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... <7>i2c_adapter i2c-0: 
master_xfer[0] R, addr=0x40, len=1
not found
bttv0: i2c: checking for TDA9875 @ 0xb0... <7>i2c_adapter i2c-0: 
master_xfer[0] R, addr=0x58, len=1
not found
bttv0: i2c: checking for TDA7432 @ 0x8a... <7>i2c_adapter i2c-0: 
master_xfer[0] R, addr=0x45, len=1
not found
bttv0: i2c: checking for TDA9887 @ 0x86... <7>i2c_adapter i2c-0: 
master_xfer[0] R, addr=0x43, len=1
not found
bttv0: registered device video0
bttv0: registered device vbi0
Adding 1020116k swap on /dev/hda2.  Priority:-1 extents:1 across:1020116k
EXT3 FS on hda3, internal journal
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS-fs error (device hdg1): load_system_files(): $LogFile is not 
clean.  Mounting read-only.  Mount in Windows.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
svc: unknown version (3)
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 
13:06:38 PDT 2006
i2c_adapter i2c-1: adapter [NVIDIA I2C Device] registered
i2c_adapter i2c-2: adapter [NVIDIA I2C Device] registered
i2c_adapter i2c-3: adapter [NVIDIA I2C Device] registered
tuner: Unknown parameter `type'
tuner: Unknown parameter `1'
i2c-core: driver [tuner] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x42
i2c_adapter i2c-0: master_xfer[0] W, addr=0x42, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x43
i2c_adapter i2c-0: master_xfer[0] W, addr=0x43, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4a
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4a, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4b
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4b, len=0
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4b, len=1
i2c_adapter i2c-0: master_xfer[0] R, addr=0x4b, len=1
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4b, len=3
i2c_adapter i2c-0: sendbytes: error - bailout.
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x60
i2c_adapter i2c-0: master_xfer[0] W, addr=0x60, len=0
i2c_adapter i2c-0: master_xfer[0] R, addr=0x60, len=7
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
i2c_adapter i2c-0: client [(tuner unset)] registered with bus id 0-0060
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x61
i2c_adapter i2c-0: master_xfer[0] W, addr=0x61, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x62
i2c_adapter i2c-0: master_xfer[0] W, addr=0x62, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x63
i2c_adapter i2c-0: master_xfer[0] W, addr=0x63, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x64
i2c_adapter i2c-0: master_xfer[0] W, addr=0x64, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x65
i2c_adapter i2c-0: master_xfer[0] W, addr=0x65, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x66
i2c_adapter i2c-0: master_xfer[0] W, addr=0x66, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x67
i2c_adapter i2c-0: master_xfer[0] W, addr=0x67, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x68
i2c_adapter i2c-0: master_xfer[0] W, addr=0x68, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x69
i2c_adapter i2c-0: master_xfer[0] W, addr=0x69, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x6a
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6a, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x6b
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6b, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x6c
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6c, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x6d
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6d, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x6e
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6e, len=0
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x6f
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6f, len=0
tuner 0-0060: tuner type not set
tuner 0-0060: tuner type not set
tuner 0-0060: tuner type not set


problem je  v tom, ze mi nepovoli nahrat modul tuner s pozadavkem type=1 
nemate nekdo nejaky tip co s tim??? modules.conf mam takto (mozna spatne)

maniakum zavinac medved:~$ cat /etc/modules.conf | grep bttv
       post-install bttv insmod tuner
       post-remove bttv rmmod tuner
alias char-major-81     bttv
pre-install bttv modprobe -k msp3400;modprobe -k tuner
options bttv card=16

budu vdecny za pomoc