Re: pwmconfig fan control nejde


To "Debian CZ/SK project discussion list" <czdebian-l zavinac debian bod cz>
From tom bod dvorak zavinac elektrahk bod cz
Date Sun, 1 Oct 2006 07:47:26 +0200 (CEST)
Importance Normal
User-agent SquirrelMail/1.4.4

> On Sat, Sep 30, 2006 at 05:03:53PM +0200, tom bod dvorak zavinac elektrahk 
> bod cz wrote:
>> ahoj, zkousim rozchodit regulaci ventilatoru pod linuxem pomoci
>> lm-sensors
>> a fancontrol, podle tohohle blogu. Problem nastava az pri prikazu
>> pwconfig
>> kdy mi vypise toto:
>>
>> tomas:/home/maniakum# pwmconfig
>> This program will search your sensors for pulse width modulation (pwm)
>> controls, and test each one to see if it controls a fan on
>> your motherboard. Note that many motherboards do not have pwm
>> circuitry installed, even if your sensor chip supports pwm.
>>
>> We will attempt to briefly stop each fan using the pwm controls.
>> The program will attempt to restore each fan to full speed
>> after testing. However, it is ** very important ** that you
>> physically verify that the fans have been to full speed
>> after the program has completed.
>>
>> /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
>>
>> mam debian etch, deska asus p5ld2
>>
>> sensors chodi, ukazuje spravne hodnoty.
>>
>> pri zkousce fancontrol mi to hodi toto: (nastaveni prevzato z blogu, jen
>> na test, fancontrol nastaveni ma vytvorit pwconfig)
>>
>> tomas:/home/maniakum# fancontrol
>> Loading configuration from /etc/fancontrol ...
>>
>> Common settings:
>>   INTERVAL=20
>>
>> Settings for 9191-0290/pwm2:
>>   Depends on 9191-0290/temp2_input
>>   Controls 9191-0290/fan2_input
>>   MINTEMP=45
>>   MAXTEMP=55
>>   MINSTART=255
>>   MINSTOP=215
>>
>> Enabling PWM on fans...
>> Starting automatic fan control...
>> cat: 9191-0290/pwm2: není souborem ani adresářem
>> Error reading PWM value from /sys/bus/i2c/devices/9191-0290/pwm2
>> Aborting, restoring fans...
>> /usr/sbin/fancontrol: line 123: 9191-0290/pwm2: Přístup odmítnut
> zkus to pod uctem root......
pod uctem root jedu, ale tady neni problem ve fancontrol, ale v pwmconfig,
ktery nevytvori ten soubor pwm2 a neudela konfiguraci, skoncil jsem na
tom, ze mi pwmconfig hodil tuto chybu:
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

>> Verify fans have returned to full speed
>>
>> diky za rady
>
> Paradit Vam muzu jedine.
> V pripade problemu nevstupujte do vlakna,ktery resi jiny problem
>
> Milan
> --
> Remember, no question is too stupid and no problem too small
>              -- We've all been beginners
> ________________________________________________
> CZdebian-l maillist  -  CZdebian-l zavinac debian bod cz
> http://www.debian.cz/mailman/listinfo/czdebian-l
> E-mail (un)subscriptions: czdebian-l-request zavinac debian bod cz
>




Partial thread listing: