Re: pwmconfig fan control nejde

[Milan Buska <mbuska zavinac centrum bod cz>]

On Sat, Sep 30, 2006 at 05:03:53PM +0200, tom bod dvorak zavinac elektrahk bod 
cz wrote:
> ahoj, zkousim rozchodit regulaci ventilatoru pod linuxem pomoci lm-sensors
> a fancontrol, podle tohohle blogu. Problem nastava az pri prikazu pwconfig
> kdy mi vypise toto:
> 
> tomas:/home/maniakum# pwmconfig
> This program will search your sensors for pulse width modulation (pwm)
> controls, and test each one to see if it controls a fan on
> your motherboard. Note that many motherboards do not have pwm
> circuitry installed, even if your sensor chip supports pwm.
> 
> We will attempt to briefly stop each fan using the pwm controls.
> The program will attempt to restore each fan to full speed
> after testing. However, it is ** very important ** that you
> physically verify that the fans have been to full speed
> after the program has completed.
> 
> /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
> 
> mam debian etch, deska asus p5ld2
> 
> sensors chodi, ukazuje spravne hodnoty.
> 
> pri zkousce fancontrol mi to hodi toto: (nastaveni prevzato z blogu, jen
> na test, fancontrol nastaveni ma vytvorit pwconfig)
> 
> tomas:/home/maniakum# fancontrol
> Loading configuration from /etc/fancontrol ...
> 
> Common settings:
>   INTERVAL=20
> 
> Settings for 9191-0290/pwm2:
>   Depends on 9191-0290/temp2_input
>   Controls 9191-0290/fan2_input
>   MINTEMP=45
>   MAXTEMP=55
>   MINSTART=255
>   MINSTOP=215
> 
> Enabling PWM on fans...
> Starting automatic fan control...
> cat: 9191-0290/pwm2: není souborem ani adresářem
> Error reading PWM value from /sys/bus/i2c/devices/9191-0290/pwm2
> Aborting, restoring fans...
> /usr/sbin/fancontrol: line 123: 9191-0290/pwm2: Přístup odmítnut
zkus to pod uctem root......
> Verify fans have returned to full speed
> 
> diky za rady

Paradit Vam muzu jedine.
V pripade problemu nevstupujte do vlakna,ktery resi jiny problem

Milan
-- 
Remember, no question is too stupid and no problem too small
             -- We've all been beginners